ID MOUNTED

ID MOUNTED

Designed to process the beveling & facing of heavy-duty pipe and flange. Inner-Mounted, mechanical swelling, safety and reliance. Not only for beveling the various steel heavy-duty pipe, but also to process the flange face, seal groove, serrated finish. Apply to the pipeline installation and repair on the nuclear, shipping building, boiler, oil, natural gas.



  • Flange Facer is an internally mounted machine with a durable construction and cover Easy set-up on site and quick adjust concentricity and Flatness, high rigid support frame to assure precision.
  • Machining sizes range from 250mm up to 3000mm or more.
  • 360 degree power feed tool post for all types of flange facing, groove machining.
  • The axial-radial feed unit of tool post is adjusted.
  • It could be changed or combined for the base clamping jaws.
  • Hydraulic unit with low heat and low oil consumption.
  •  Hydraulic、Numerical、 Pneumatic drive, wide use range.
  • Pneumatic: Driven by pneumatic motor, Air working pressure: 0.63-1.0Mpa, Air Consuming flux: 1500-3500L/min.
  • Numerical controller: Driven by the high-power servo motor and PLC control system. Timing range: 0-20m/manpower 2.0kw, 220~230V,50-60Hz.
  • Hydraulic: Driven by hydraulic motor. Rated pressure:13Mpa, Rated Flux:28L/min, Output torque 260NM, Electric power7.5KW,380V-3ph.

If You Are Intrested ID MOUNTED ? Call Us +91 832 018 4681