OD MOUNTED

OD MOUNTED

Designed to process the beveling & facing of heavy-duty pipe and flange. Out-Mounted, mechanical swelling, safety and reliance.Not only for beveling the various heavy-duty steel, but also to process the flange face, seal groove, serrated finish.Apply to the pipeline installation and repair on the nuclear, shipping building, boiler, oil, natural gas.



  • Swivel tool post with 360°power feed, wide range use.
  • It has 3 feeding tool post: water line, plane processing, idling.
  • Feed hand-wheel of horizontal and vertical tool post with scale, precise and convenient regulation.
  • Can use hydraulic drive motor or Numerical drive motor, strong power, meets different requirements of customers.
  • Pneumatic motor is also optional, used for proof-explosion on-site operation.
  • Applied for heavy duty cutting and mounting, the maximum depth of roughing processing is 5MM.
  • Tool post can feed automatically for processing serrated finish spacing and plane facing on axial side, processed precision is guaranteed.
  • Pneumatic: Driven by pneumatic motor, Air working pressure: 0.63-1.0Mpa, Air Consuming flux:1500-3500L/min.
  • Numerical controller: Driven by the high-power servo motor and PLC control system. Timing range: 0-20m/min,Power 2.0kw, 220~230V,50-60Hz.
  • Hydraulic: Driven by hydraulic motor. Rated pressure: 13Mpa, Rated Flux:28L/min, Output torque 260NM, Electric power7.5KW,380V-3ph.

If You Are Intrested OD MOUNTED ? Call Us +91 832 018 4681